DODGE FC-IP-103RE Flange Block Bearings

Designation of housing:PE207-; B:32 mm; H1:19 mm; G:R1/8"; C:25.7 kN; Recommended tightening torque for set screw:5.5 Nm; s1:16 mm; H:47.6 mm; C0:15.2 kN; L:163 mm;

Unit, Type:Insert Bearing Unit; Grease Type:SH44M; Bearing Unit, Type:Take-Up Type; Unit Body Material:Cast Iron; Surface Treatment:No; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; d:55; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit;

Max. Allowed rpm(rpm):1800; d:220; Basic Dynamic Load Rating(N):241000; Specifications/Environment:Standard; Retainer Type:Punching; Size Standards:Metric System; Outer Ring Shape:Flat; B:56; Type:Ball; Bearing Style:Single Shielded;

Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Volume Discount:Available; Width T(mm):19; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; RoHS:6;

Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH44M; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Round flange shape; Machining:No; Fit:J7; Diameter series symbol:Medium Load; Basic Load Rating, Static Rating(N):21300;

Design Units:Imperial; T - Bearing Width to Flange:0.6562 in; da - Cone Frontface Backing Diameter:3.35 in; Bearing Weight:7.9 lb; db - Cone Backface Backing Diameter:3.58 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Cone Part Number:657; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1010

Roller Follower Type:Non-Separable Type; Material:[Carbon Steel] Carbo; RoHS:6; Roller Follower Type:Non-Separable Type; Category:Roller Follower; Unit:[Metric Series] Metr; Roller O.D. D(Ø):40; Basic Load Rating, Static Rating(kN):42; Roller Width B(mm):21; Roller Type:Spherical Outer Ring;

Dimension G:3.980 in; Oil Lubrication - B/C/O Seal:900 rpm; Pre Install Clearance Max:0.0047 in; Engineering Group:Mounted Bearing; Dimension F:16.14 in; Eng Internal Radial Clearance - Min:0.0030; Dimension C:5.98 in; Eng Internal Radial Clearance - Max:0.0047; Housing Style:Two-Bolt Pillow Bloc; D

H2:98 mm; SW:4.76 mm; C0:37.8 kN; T min.:-20 °C; d1:76.2 mm; L1:118 mm; L2:22 mm; A2:40 mm; B1:66.6 mm; N1:27 mm;

Bearing Retained:Yes (with retaining; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Bearing I.D. d(mm):10; Number of Bearings:Double; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):47; Number of Bearings:Double; Bearing Retained:Yes (with re

N:23mm; G:M6x1; e:29 mm; T max.:100 °C; Designation of housing:FA212-; Weight:3.92 kg; A1:20 mm; s1:26.85 mm; C0:32.8 kN; H:250 mm;

B:27 mm; C:14 kN; Dz:60 mm; S:7.5 mm; A1:11 mm; N:11,5mm; T min.:-40 °C; d:22.22 mm; T max.:100 °C; C0:7.88 kN;

Minimum Buy Quantity:N/A; Inventory:0.0; Brand:NTN; Bearing ring (inner ring) WS:WS81207; Dc1:35 mm; Characteristic inner ring frequency, BPFI:6.5 Hz; Nlim (oil):4,900 rpm; Category:Bearings; Ca:54.5 kN; Characteristic outer ring frequency, BPF0:6.5 Hz;

Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):67400; RoHS:6; Bearing Unit, Type:Round flange shape; Grease Type:Standard Grease; d:75; Unit Body Material:Cast Iron; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7;

Static load, C0:5.4 kN; d:15 mm; Characteristic cage frequency, FTF:0.36 Hz; Characteristic rolling element frequency, BSF:3.45 Hz; f0:12.3; Mass:0.08 kg; B:13 mm; Characteristic outer ring frequency, BPF0:2.56 Hz; Radial clearance class:C3; Nref:17,000 rpm;