FAG Z-546485-01-KL Single Row Ball Bearings

Design Units:Imperial; Cg - Geometry Factor11:0.221; da - Cone Frontface Backing Diameter:13.62 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:79200 lbf; Cone Part Number:HM959738DW; R - Cone Frontface To Clear Radius1:0.130 in; Cup Part Number:HM959710; Y2 - ISO Factor10:1.16; C

Volume Discount:Available; Flange O.D. H(φ):47; Type:Bearings with Housin; Bearing Part Number:6900; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flanged Pilot Type;

Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Seals:VV (Non-Contact Rubb; Number of Bearings:Double; Flange O.D. H(φ):47; Number of Bearings:Double; Bearing I.D. d(mm):8; RoHS:6; Type:Bearings with Housin;

H2:114 mm; A1:35 mm; T max.:100 °C; L:135 mm; Designation of housing:PG210N-; H:57.2 mm; C:35.1 kN; s1:25.8 mm; J:95 mm; A:60 mm;

RoHS:6; Type:Bearings with Housin; Shape:T-Shaped; Seals:ZZ (Double Shield); Holder Surface Treatment:Electroless Nickel P; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Bearing Part Number:6007; C Chamfered:Not Provided; Shape:T-Shaped;

A:75 mm; B1:66.6 mm; d:50 mm; s1:46.8 mm; C:62 kN; S:24.6 mm; H1:27 mm; L:275 mm; J:212 mm; T max.:100 °C;

d:40; Bearing Unit, Type:Square flange shape; RoHS:6; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Tapered hole adap

Precision:Grade 0; Seal, Shield Symbols:LLB; Type:Ball; Number of Raceway Ring Rows:Single Row; Size Standards:Metric System; Preload Mark:C3; B:7; Basic Dynamic Load Rating(N):3350; Max. Allowed rpm(rpm):32000; Bearing Style:Rubber Sealed;

e - Geometry Factor:0.26; Shaft Size  :5 in; Dimension S:3.12 in; Eng Internal Radial Clearance - Min:0.0037; Dimension H:1.50 in; Dimension L Exp:3.32 in; Dimension D:5.13 in; Grease Lubrication - M/N Seal:700 rpm; Grease Lubrication - T Seal:1000 rpm; Full Timken Part Number:99999B;

H3:80; B1:48.3 mm; A2:32.1 mm; T max.:100 °C; J:100 mm; Weight:1.1 kg; B:36.4 mm; C:19.5 kN; e:2 mm; s1:34.1 mm;

e - ISO Factor3:0.42; D:170 mm; Cg - Geometry Factor:0.0898; Design Units:METRIC; Db - Cup Backface Backing Diameter:154.94 mm; K - Factor2:1.39; Series:30219; Da - Cup Frontface Backing Diameter:160.00 mm; Y - ISO Factor4:1.43; r - Cup Backface To Clear Radius1:2.54 mm;

T min.:-40 °C; Designation of bearing:EX306-19G2T04; L1:54 mm; H:50 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:P306-; s1:35.75 mm; G:M6x1; A1:36 mm; N:17mm;

N1:29.1 mm; H1:28.6 mm; N:18mm; s1:26.85 mm; Z:35.6 mm; H2:138.1 mm; Recommended tightening torque for set screw:16.8 Nm; C0:32.8 kN; H:68.3 mm; B:53.7 mm;

C1:0.8 mm; Characteristic rolling element frequency, BSF:10.91 Hz; B:25.5 mm; C:24 mm; G1:21 mm; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:12 Hz; Characteristic outer ring frequency, BPF0:10 Hz; h:8 mm; Max operating temperature, Tmax:120 °C;

Cone Part Number:05079; C1 - Dynamic Radial Rating (1 million revolutions)5:6010 lbf; C0 - Static Radial Rating:5720 lbf; Y - ISO Factor9:1.68; e - ISO Factor8:0.36; C - Cup Width:0.4375 in; B - Cone Width:0.5662 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Cup Part Number:05185-B; d:0.7869 in;